Superior grade, high speed, extreme pressure, PTFE chain lube.
Originally designed for the superbike industry, INOX- MX9 No Chukka Chain Lube is now in high demand for numerous applications such as, hoists, harvesters, forklifts, conveyors and dirt bikes. The perfect blend of PTFE and tackifiers allow this chain lube to not only hold on but at the same time give you smooth effortless transmission in any application. Demand is particularly high in the harshest of farming conditions as INOX-MX9 is one of the most robust , durable and reliable chain lubes on the market today.
LANOX-mx4 is a heavy duty anti-moisture, anti-corrosion lubricant made with a high grade lubricating oil and refined pure lanolin base with specialized chemical compounds, contains no silicon, kerosene, acids or dieselene, is harmless to metal points and surfaces, plastics, painted and enamel finishes, fiberglass, Formica, rubber or neoprene seals, doesn’t become sticky, gooey or gum up. DOESN’T DRY OUT OR WASH OFF WITH WATER. Non-conductive, non-static and non-corrosive.
Lanolin is a natural wax found in animal wool especially the wool from sheep, commonly referred as ‘WOOL FAT’ or ‘WOOL GREASE’: it has wide spread uses, cosmetics, medical, soaps, etc.
Industrial grade lubricant that you can use in the house, garage and shop. In laboratory tests, ProTecta with its extreme pressure additives withstands 5 times the lubricating pressure of the leading brands to eliminate squeaks and lubricate longer. ProTecta’s advanced formula provides a superior lubricating film that continues to provide protection when the oil dries. It adheres to metal better than other spray lubricants, and it cleans most surfaces and quickly penetrates and loosens frozen or rusted metal parts. Makes all other spray oils obsolete! Resists water and drives moisture from working surfaces. Evaporates leaving a protective, long lasting, non-sticky, dust-free film.
Metal Corrosion occurs where metals are left exposed to moisture within the air. This is due to a reaction with oxygen which in turn creates rust and eventually leads to corrosion. Perform these simple steps to give your new steel the best protection and longevity from corrosion.
Step 1 – Clean It
1. Remove all rough surfaces such as sharp edges, mill scale and weld splatter by abrading, sanding or wire brushing.
2. Remove contaminants and foreign particles using a clean cloth and a suitable non-residue solvent such as Galmet® Enamel Spraying Thinner 300C.